Skip to content

AUTO ERECTOR WAT E-COMM

auto Erector WAT E-Comm


PREVENTATIVE MAINTENANCE SERVICE DETAILS

Erector & Closing Module

  • Check Drive Belts: Check for excessive wear and tension. Bottom belts/side belts require yearly replacement.
  • Motors: Check and lubricate the drive chain and motor chain. Check motors are spinning at the same rate and adjust if needed.
  • Sensors: Verify all sensors are working properly, are clean and clear of debris, and verify all sensor mounts are tightened down.
  • Regulators: Set at the proper PSI. Check and drain the main regulator. Clean the vacuum generator.
  • Cassettes/Magazines: Lubricate all the chain drives. Clean the acme shaft. Verify the hopper raises and lowers freely.
  • Side Belt Shafts: Inspect the linear bearings for wear. Clean the acme shaft and make sure they are lubricated with dry PTFE.
  • HMI Screen: Verify the function of each component. Verify the peel off arm is tensioned correctly.
  • Side Belt Shafts: Inspect the linear bearings for wear. Clean the acme shaft and make sure they are lubricated with dry PTFE.
  • HMI Screen: Verify the function of each component. Verify the peel off arm is tensioned correctly.
  • Air Cylinders: Verify all air cylinders are free from damage. Verify air connectors in the electrical box are seated properly. Verify all machine bed rollers can spin freely. Tighten any loose hardware. Check air connections for leaks, and verify air supply is free from debris and air is clean and dry.
  • Tape Heads present in the machine (Top & Bottom or One only) will be serviced as part of the PM.

NOTE: Spare Heads onsite should use the Tape Heads PM Program for support on additional units.

PROGRAM SERVICE LEVEL VISIT FREQUENCY ADDED BENEFIT PM RATE MULTI-YEAR DISCOUNT PREVENTATIVE MAINTENANCE GENERAL SERVICES
TITANIUM Custom frequency of your choice Custom list price discount % on PM parts kits Custom multi-year program discount %
  • A technician will be pre-scheduled to arrive on-site and provide PM for operating equipment according to manufacturer recommended guidelines
  • All work is tracked by serial number
  • Mechanical & pneumatic components review
  • Operating health check up
  • Recommend replacement parts
  • Ongoing operator training for proper use of equipment
PLATINUM Monthly
(12 service visits per year)
10% off
list price discount on PM parts kits
5% – 2 years
8% – 3 years
GOLD Quarterly
(4 service visits per year)
10% off
list price discount on PM parts kits
5% – 2 years
8% – 3 years
SILVER Semi-Annual
(2 service visits per year)
7% off
list price discount on PM parts kits
5% – 2 years
8% – 3 years
BRONZE Annual
(1 service visit per year)
5% off
list price discount on PM parts kits
5% – 2 years
8% – 3 years

auto Erector WAT E-Comm Application