Harness and cable assembly manufacturers can also choose from a wide variety of cloth tape (glass and acetate) in several color choices. Custom colors may be available based on usage quantities. Polyester and polyimide film tapes utilizing natural rubber, acrylic or silicone adhesive systems are also available.
Filter By
Products
Page 1 of 1
-
4118
Kapton® polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required. Operating temperature range is -60°C (-76°F) to +260°C (500°F).
View Product -
4428
Polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required. Operating temperature range is -60°C (-76°F) to +260°C (500°F).
View Product -
4429
Extra strength polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.
View Product -
4560
This printable tape, with acetate cloth backing and a thermosetting rubber adhesive system offers high adhesion, conformability, and excellent insulating properties.
View Product -
4616
MIL-T-4053 B Along with its high adhesion and resistance to tearing, this tape offers a rubber thermosetting adhesive system that gives it excellent solvent resistance.
View Product -
4617
CID AA-59770-4, MIL-I-15126F 4617 has an inert, temperature resistant, high tensile strength backing with an acrylic adhesive. Acrylic thermosetting adhesive system provides outstanding resistance to oils, solvents and chemicals. Its excellent conformability remains flexible after cure. This tape is ideal for inter-layer insulation, coil outer wraps, tie-downs, lead insulation and...
View Product -
4618
Inert, high strength backing and heat resistant silicone adhesive for high temperature applications. This tape resists edge fraying and rotting and is flexible and varnish absorbent. Used in applications where solvent resistance, flame retardance and abrasion resistance is required.
View Product -
51579
Kapton® polyimide backing and high tack acrylic adhesive offers excellent chemical and thermal resistance with excellent electrical insulating properties. This tape is used where toughness and puncture resistance are required.
View Product -
RG46
Woven fiberglass pressure-sensitive tape. Can withstand exposure to temperatures up to 400ºF (204ºC) for many hours, 300ºF (148ºC) for several weeks, and 250ºF (121ºC) permanently. The thermosetting properties of the adhesive provide resistance to strong solvents (e.g. xylene, toluene). The cure rate of the adhesive is time / temperature dependant.
View Product -
RG47
High Temperature - Tensile strength, dimensional stability, and consistent thickness, combined with high holding properties makes RG47 an excellent choice for splicing, especially materials having rough surfaces and/or low internal strength (e.g. textiles, roofing materials).
View Product -
RG48
Woven fiberglass pressure-sensitive tape designed to be used in strategic masking off areas for thermal spray / plasma spray operations. Can withstand exposure to temperatures up to and in excess of 500ºF (260ºC). The high tensile strength and dimensional stability of the glass cloth backing, combined with a thermosetting silicone...
View Product