Filter By
Products
Page 1 of 2
-
4118
Kapton® polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required. Operating temperature range is -60°C (-76°F) to +260°C (500°F).
View Product -
4617
CID AA-59770-4, MIL-I-15126F 4617 has an inert, temperature resistant, high tensile strength backing with an acrylic adhesive. Acrylic thermosetting adhesive system provides outstanding resistance to oils, solvents and chemicals. Its excellent conformability remains flexible after cure. This tape is ideal for inter-layer insulation, coil outer wraps, tie-downs, lead insulation and...
View Product -
4618
Inert, high strength backing and heat resistant silicone adhesive for high temperature applications. This tape resists edge fraying and rotting and is flexible and varnish absorbent. Used in applications where solvent resistance, flame retardance and abrasion resistance is required.
View Product -
51587
This combination of a tough, conformable polyester backing and rubber thermosetting adhesive may be used for a variety of electrical applications. This tape is abrasion and puncture resistant, resists chemicals and solvents when thermoset, and has excellent electrical insulating properties.
View Product -
51589
Polyester film backing with an acrylic adhesive provides flexibility, solvent resistance, puncture resistance and excellent long-term aging characteristics.
View Product -
591
A bleached flatback paper product coated with a high shear resistant pressure-sensitive natural rubber/resin adhesive on both sides that bond equally as well to almost any surface. White colored easy release treated crepe paper liner allows for either machine or hand application. A recognized standard in the manufacture and repair...
View Product -
AC50
Polyethylene (PE) coated cloth tape with aggressive pressure sensitive natural rubber adhesive. Specifically designed for applications where a significant level of tensile and tear strength is required. An excellent choice for sealing heating and air ventilation systems, repairs, and serves as an excellent moisture barrier.
View Product -
ALF300
3.0 mil dead soft aluminum foil with aggressive pressure-sensitive acrylic adhesive. Provides instant, water-resistant adhesion to clean, dry surfaces. Adheres well to itself (where overlapped) yet dispenses from the roll for easy application. Conforms to irregular/curved surfaces as it remains flexible and resists cracking and lifting. Also UV resistant. Recommended...
View Product -
BD23
A medium strength, smooth crepe paper, pressure-sensitive tape having excellent tear strength and conformability to irregular surfaces. BD23's stain free adhesive is formulated to provide resistance to elevated temperatures (up to 300°F). Time of exposure and temperatures will vary depending on surfaces and application conditions.
View Product -
BT100
Durable rubber product with an aggressive, acrylic, pressure-sensitive adhesive provides instant adhesion to clean/dry surfaces with little to no hot glue required on edges to prevent media intrusion. Remains flexible and resists cracking and lifting. Conforms to irregular/curved surfaces. Clean removal after blasting. White crepe release-coated paper liner can be...
View Product -
PG16
A beige, smooth, crepe masking tape with a pressure-sensitive, natural rubber adhesive. Good quick stick and holding properties. Typical temperature ranges from room temperature to 325°F (160°C) for 20 to 40 minutes.
View Product -
PG20
An aluminized, silver, saturated crepe paper backing protects the specially formulated, high temperature resistant, pressure-sensitive natural rubber adhesive from the effects of ultraviolet light. Can be used in outdoor applications for periods of up to one month depending on the weather conditions and the surface to which the tape is...
View Product