Filter By
Products
Page 1 of 2
-
AM
AM (AquaMask) is an aqua colored, conformable, saturated, crepe paper masking tape with pressure-sensitive rubber adhesive. Good adhesion and holding properties. Clean, easy removal. Resists paint flaking and wet sanding. Compatible with both water and solvent-based paints. UV-resistant up to three (3) days. Temperature resistant up to 225°F (107°C) for...
View Product -
BD23
A medium strength, smooth crepe paper, pressure-sensitive tape having excellent tear strength and conformability to irregular surfaces. BD23's stain free adhesive is formulated to provide resistance to elevated temperatures (up to 300°F). Time of exposure and temperatures will vary depending on surfaces and application conditions.
View Product -
FM35
FM35 “fine line” masking tape uses thermally stabilized PVC backing with a rubber-based, pressure-sensitive adhesive. This tape is designed to offer a high degree of conformability, is waterproof, and solvent resistant. Operating temperature range of 40°F to 280°F (4.4°C to 138°C).
View Product -
FM71
FM71 “fine line” masking tape uses thermally stabilized PVC backing with a rubber-based, pressure-sensitive adhesive. This tape is designed to offer a high degree of conformability without excessive stretch. Will hold and cleanly remove from surfaces in the presence of 250° F (120° C) temperatures for at least 30 minutes....
View Product -
HMF
Hand Masking Film is a pre-folded high density polyethylene masking film. The thick and durable 12 micron film is treated to resist overspray flaking during paint applications.
View Product -
OM
OM (OrangeMask®) is an orange, high quality, smooth, crepe paper masking tape with a natural rubber adhesive. Good quick-stick and holding properties for the composites industries. Smooth-to-the-touch, straight, clean paint-break line, highly conformable and flexible, tear resistant, moisture and solvent resistant, UV resistant up to 72 hours, and can be...
View Product -
PG16
A beige, smooth, crepe masking tape with a pressure-sensitive, natural rubber adhesive. Good quick stick and holding properties. Typical temperature ranges from room temperature to 325°F (160°C) for 20 to 40 minutes.
View Product -
PG21
A beige, high temperature, fine crepe paper masking tape with a pressure-sensitive rubber/resin adhesive. Designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325?F (163°C) for 30 minutes (time and temperature determined by surface). Performs well in wet strip applications. Its easy handling,...
View Product -
PG21A
A beige, high temperature, fine crepe paper masking tape with a pressure-sensitive natural rubber adhesive. Designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325°F (163°C) for 30 minutes (times and temperatures determined by surface). Performs well in wet strip applications. Its easy...
View Product -
PG5
Recognized as the premium painter’s tape. Offers an excellent balance of quick stick, panel adhesion and holding properties. Recommended for most paint masking applications where excellent cornering with clean removal is desired. Will support masking paper aprons at 160°F (70°C) for 30 minutes. ASTM-D6123/D6123M (1), CID AA-883B (1)
View Product -
PG505
A paint contractor industry staple. Crepe paper masking tape coated with a pressure-sensitive natural rubber adhesive. Offers an excellent balance of quick stick, panel adhesion and holding properties. Not recommended for outdoor exposure.
View Product -
PG57R
A pressure-sensitive masking tape designed primarily for the aircraft industry where resistance to strong solvent / high solids and polyurethane-based paints is a necessity. Adhesive is specially formulated to provide excellent adhesion-to, and transfer-free removal from, a variety of prepared aluminum surfaces. PG57R product is able to support large kraft...
View Product