All these challenges are met head-on with IPG’s full line of painters tapes. From high performance OM and PT14 masking tapes to the always useful general purpose masking products, IPG has the right mix for any general manufacturing facility need.
Filter By
Products
Page 1 of 2
-
OM
OM (OrangeMask®) is an orange, high quality, smooth, crepe paper masking tape with a natural rubber adhesive. Good quick-stick and holding properties for the composites industries. Smooth-to-the-touch, straight, clean paint-break line, highly conformable and flexible, tear resistant, moisture and solvent resistant, UV resistant up to 72 hours, and can be...
View Product -
PG20
An aluminized, silver, saturated crepe paper backing protects the specially formulated, high temperature resistant, pressure-sensitive natural rubber adhesive from the effects of ultraviolet light. Can be used in outdoor applications for periods of up to one month depending on the weather conditions and the surface to which the tape is...
View Product -
PG21
A beige, high temperature, fine crepe paper masking tape with a pressure-sensitive rubber/resin adhesive. Designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325?F (163°C) for 30 minutes (time and temperature determined by surface). Performs well in wet strip applications. Its easy handling,...
View Product -
PG21A
A beige, high temperature, fine crepe paper masking tape with a pressure-sensitive natural rubber adhesive. Designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325°F (163°C) for 30 minutes (times and temperatures determined by surface). Performs well in wet strip applications. Its easy...
View Product -
PG48
A beige, high temperature, fine structured, crepe paper masking tape with a pressure-sensitive natural rubber/resin adhesive and a non-printable release coat. Designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325°F (163°C) for 30 minutes (times and temperatures are determined by surface). Easy,...
View Product -
PG49
Along with good quick stick and holding properties, PG49 masking tape is resistant to strong solvents, paints and temperatures to 325°C/163°C.
View Product -
PG505
A paint contractor industry staple. Crepe paper masking tape coated with a pressure-sensitive natural rubber adhesive. Offers an excellent balance of quick stick, panel adhesion and holding properties. Not recommended for outdoor exposure.
View Product -
PG57R
A pressure-sensitive masking tape designed primarily for the aircraft industry where resistance to strong solvent / high solids and polyurethane-based paints is a necessity. Adhesive is specially formulated to provide excellent adhesion-to, and transfer-free removal from, a variety of prepared aluminum surfaces. PG57R product is able to support large kraft...
View Product -
Poly Mask
Red polyethylene film tape with a rubber-based pressure-sensitive adhesive that bonds well to most surfaces.
View Product -
PT14
Blue fine crepe paper masking tape with a specially formulated pressure-sensitive, synthetic rubber adhesive designed for exposure to sunlight for up to fourteen days. Exhibits easy, clean removal from most surfaces. Excellent conformability as well as smooth backing for superior paint lines and reduced fingertip abrasion. Consistent, easy unwind and...
View Product -
PT7
Conformable crepe paper masking tape with acrylic adhesive. Secure adhesion and clean removal from most surfaces. Resistant to U.V. (up to 14 days), humidity and paint bleed-through.
View Product -
PT8
Light green crepe paper masking tape with a specially formulated pressure-sensitive, synthetic rubber adhesive. Designed for direct exposure to sunlight up to eight days. Conformable, consistent, easy unwind. Resistant to humidity and paint bleed through. Secure adhesion with easy, clean removal from most surfaces. (Caution: green color is a dye...
View Product
