AUTO CASE ERECTOR PST

PREVENTATIVE MAINTENANCE SERVICE DETAILS

External Cleaning: Covers, keypad, blades, feed wheel, heater (top & bottom)
Internal Cleaning: Remove paper pieces and dust. Clean
solenoid and plunger.
Drive Belts: Check belts for excessive wear. Check the tension of the belts. Yearly replacement of all belts is encouraged.
Motors: Check and lubricate drive chain and motor chain. Check that the motors spin at same rate and adjust if needed.
Sensors: Verify all sensors work properly. Verify all sensors are clean and clear of debris. Verify all the sensor mounts are tightened down.
Regulators: Set at proper PSI. Check and drain main regulator. Clean the vacuum generator.
Box Hopper: Lubricate all the chain drives. Clean the acme shaft. Verify the hopper raises and lowers freely.

Side Belt Shafts: Inspect the linear bearings for wear. Clean the acme shaft. Make sure the shafts are lubricated w/PTFE.
HMI screen: Verify function of each component. Verify the peel off arm is tensioned correctly.
Air Cylinders: Verify all air cylinders are not damaged. Verify the air connectors in the electrical box are seated properly. Verify all the machine bed rollers can spin freely. Tighten any loose hardware. Check air connections for leaks. Verify the air supply is free from debris and the air is clean and dry.
Tape Heads present in the machine (Top & Bottom or One only) will be serviced as part of the PM.
NOTE: Spare Heads onsite should use the Tape Heads PM Program for support on additional units.

PROGRAM SERVICE LEVEL	VISIT FREQUENCY	ADDED BENEFIT	PM RATE MULTI-YEAR DISCOUNT	PREVENTATIVE MAINTENANCE GENERAL SERVICES
TITANIUM	Custom frequency of your choice	Custom list price discount % on PM parts kits	Custom multi-year program discount %	A technician will be pre-scheduled to arrive on-site and provide PM for operating equipment according to manufacturer recommended guidelines All work is tracked by serial number Mechanical & pneumatic components review Operating health check up Recommend replacement parts Ongoing operator training for proper use of equipment
PLATINUM	Monthly (12 service visits per year)	10% off list price discount on PM parts kits	5% – 2 years 8% – 3 years
GOLD	Quarterly (4 service visits per year)	10% off list price discount on PM parts kits	5% – 2 years 8% – 3 years
SILVER	Semi-Annual (2 service visits per year)	7% off list price discount on PM parts kits	5% – 2 years 8% – 3 years
BRONZE	Annual (1 service visit per year)	5% off list price discount on PM parts kits	5% – 2 years 8% – 3 years